Skip to content

Jaguar/Land Rover JLR SDD PATHFINDER Full System

Original price £719.00 - Original price £799.99
Original price
£739.00
£719.00 - £799.99
Current price £739.00
Availability:
in stock, ready to be shipped
Availability:
Out of stock
Availability:
in stock, ready to be shipped
Availability:
in stock, ready to be shipped
Availability:
in stock, ready to be shipped
Availability:
in stock, ready to be shipped
Availability:
in stock, ready to be shipped
Laptop: Panasonic CF-19
Request a quote

Jaguar/Land Rover JLR SDD PATHFINDER Full System

WHAT'S IN THIS PACKAGE

  • Your choice of Grade A used laptop or tablet, along with its charger and adapter. All of which should have at least i5 processor and 8GB RAM, or similar.
  • A Brand new, fast SSD Hard Drive inside the laptop or tablet, containing the software.
  • A diagnostic tool/interface/multiplexer along with all its cables.
  • 12 Months Warranty on all hardware – exchange a new one if yours is faulty.
  • 6 Months Warranty on all software – remote support and updates.

     

    DESCRIPTION

    JLR SDD PATHFINDER is the latest generation of diagnostic equipment developed by Allscanner for remote diagnosis platform. The ultra-high integrated hardware design can fully adapt to a variety of original diagnostic software, not only support local diagnosis, but also realize super remote diagnosis

    All System Diagnostic Function

    By penetrating all available PCMs, including but not limited to PCM, , EPS, PDM, TPM, BCM, ABS, SCCM, etc., JLR SDD PATHFINDER retrieves information and performs OE-level diagnostics on all available vehicle systems, like read and clear codes, view data stream and freeze frame and read vehicle information, PCM Replacement. It not only enables you to troubleshoot promptly but also makes you customize the configuration.

    SDD and Pathfinder 2024

    • Fault Code Reading / Resetting analysing for repairs
    • Service Lights
    • Read / Clear / Reset Air bag Light codes
    • Read / Clear / Reset ABS Light codes
    • Programming Modules
    • Clearing adaptions
    • V130 Programming extra keys
    • Programming personalisation like ride height or folding wing mirrors.
    • DPF Regeneration
    • Activate pumps for brake bleeding
    • Adjust vehicle heights
    • Program new DSC units

    Diagnostic Function:

    • Read and clear fault codes  
    • Read data stream  
    • Reset maintenance service  
    • Test parts function  
    • Program new keys  
    • Change a car's configuration CCF  
    • Program a new module  

    Support Various Special Reset Features

    For various scheduled service and maintenance include Maintenance Light Reset, throttle learning, steering angle learning, brake pad reset, tire pressure reset, ABS exhaust, battery matching, gear information learning, injector coding, regeneration, headlight matching, gearbox learning, suspension matching, Sunroof initialization, A/F adjustment, electronic pump start, release transportation mode, tire modification, door and window calibration, urea reset, NOX reset, start-stop setting, language setting, seat calibration, shielding failure, etc.

    ✔️ Oil Lamp, Oil Reset: This function allows you to perform reset for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate.

    ✔️ Electronic Parking Brake Reset: It is important in the maintenance of electronic braking system's safety and efficiency.

    ✔️ Steering Angle Calibration: Helping clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

    ✔️ ABS Bleeding: This function allows you to perform various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS).

    ✔️ Tire Pressure Monitor System Reset: This function allows you to quickly look up the tire sensor IDs from the vehicle’s PCM, as well as to perform TPMS replacement and sensor test.

    ✔️ Gear Learning: The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

    ✔️ Injector Coding: Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when aninjector is turned off.

    ✔️ Battery Maintenance System Reset: Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

    ✔️ () Regeneration: Specially works for system with regeneration, component replacement teach-in and teach-in after replacing the engine control unit.

    ✔️ Electronic Throttle Position Reset: This function enables you to make initial settings to throttle actuators and returns the 'learned' values stored on PCM to the default state. Doing so can accurately control the actions of regulating throttle (or idle engine) to adjust the amount of air intake.

    ✔️ Gearbox Matching:

    1. This function can complete the gearbox self-learning to improve gear shifting quality.
    2. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift quality.
    ✔️ AFS (Adaptive Front-lighting System) Reset: This feature is used to initialize the adaptive headlamp system. According to the ambient light intensity, the adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjust the headlamp lightingangle while monitoring the vehicle speed and body posture.
    ✔️ Sunroof Initialization: This function can set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car etc.

    ✔️ Suspension Calibration:

    1. This function can adjust the height of the body.
    2. When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, you need to perform this function to adjust the body height sensor for level calibration.  

    12 Months ROCK SOLID Warranty

    Your peace of mind is our priority. Enjoy a 12-month warranty that ensures immediate replacement in case of ANY interface issues.

    • No Waiting for repairs 
    • No Workshop Downtime 
    • No Loss Revenue 
    • Hassle-free and No question asked

    12 Months Warranty also covers Softwares and Technical issues which ensures:

    • Remote Technical Support to help
    • Updates are always available at very low price

    Multiple Languages:

    English, German, French, Italian, Spanish, Portuguese, Finland, Denmark, Swedish, simplified Chinese, etc.

    SDD Supported Vehicles Model:

    For Land Rover 2005-2017  
    L538C, L319, L494, L550, L320, L322, L538JV, L359, L405, L316  
    For Jaguar 1999-2017  
    X260, X150, X250, X350, X152, X351, X760, X100, X761, X400, X202 

    Your Success, Our Priority

    • Exceptional Support: Doubts? Concerns? Our genuine support is just a message away. Reach out before you buy – we're here to reassure you. We can connect over the internet and show you or support you in doing your first diagnosis
    • Lightning-Fast Delivery: Need it ASAP? Count on our super-fast delivery to get you started promptly. 
    • Local Excellence: Proudly UK-based, we're more than just a company – we're your neighbours committed to top-notch service.

    Tailored to Your Needs

    We understand the diverse demands of the industry. Need a different setup? Whether it's replacing an older version system with another system, adding additional systems, or adding a generic scan tool for specific needs, we've got you covered. BMW + MERCEDES? VAG + JLR? How about all 4? ALL IN ONE LAPTOP. Any combination of systems is possible. Get your Custom-made diagnostic system NOW!

      Compare products

      {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

      Select first item to compare

      Select second item to compare

      Select third item to compare

      Compare