Chat With Us:
+44-7888686604
+44-7888686604
How to read OBD Scanner for Land Rover: Everything you must know for Accurate Troubleshooting
Having a health monitor, aka an OBD, for your Land Rover is essential. An onboard diagnostic is a technical scanner attached to your vehicle that helps you identify the potential issues caused by the transmission and engine. This scanning device is simple to use and understand with proper guidance. This will allow you to learn every detail about your car and prevent it from experiencing any long-term damage.
This blog will tell you everything you must know about operating a Land Rover diagnostic tool with Global Diagnostics.
The importance of OBD in land Rover
It is no secret that a Land Rover is a luxury car requiring detailed attention for its long-lasting brilliance. An OBD helps you take the proper care of it with its advanced features. The following are some of the main reasons why OBD is essential for your vehicle:
As mentioned earlier, Land Rover is a luxury car, and luxury cars are built differently than regular on-roading ones. The technical parts can get complex since a Land Rover's transmission and engine issues can cause long-lasting damage.
You must use car diagnostic tools for Land Rover because they instantly let you know when there is a minor issue in the system. It might sound ignorable, but when you are aware of minor defects, you can easily prevent long-term damage and save a lot of money.
The OBD comes with advanced features like drive assistance. This scanning device can also maintain service reminders, adjust suspension, and more.
When you use an OBD scanner for your Land Rover, it regularly checks the emission and fuel efficiency. The scanner will instantly notify you if the pollution has increased or requires expert repair.
Off-roading can cause damage to your Land Rover. So, a Land Rover diagnostic system can instantly determine if any tears or damage were caused to the internal parts of your car. It can also identify the difference before and after off-roading, allowing you to understand the potential threats that can cause long-lasting damage to your Land Rover.
(Also read from our previous blogs: How to Choose the Best Vehicle Diagnostic Tools?)
What are the Common Land Rover error codes?
The OBD scanning system will indicate issues with the help of codes. The following are some of the standard Land Rover error codes:
1.Transmission Code
- P0700: Malfunction in Transmission Control System
- P0730: Incorrect Gear Ratio (issues caused due to transmission slipping)
- P0456: Minor Leak Detection in the Evaporative Emission System
- P0171: Bank 1 System Lean (refers to not enough fuel or extreme air)
- P0174: Bank 2 System Lean (refers to the cylinder)
- B1B02: Failure in keyless entry
- U0122: Communication with Vehicle Dynamics Control Module lost
- U0415: Data from ABS Control Module is not valid
- C1A13: No decrease in pressure during Air Suspension Vent
- C1A20: Fault in Air Suspension Line
- B10A2: Signals System resetting
- B1D17: Sensor fault in the security system or alarm
- B1623: Issue in immobilizer system
What Happens Next..
Now that your Land Rover fault code reader has informed you of the issue, you need to:
1. Check
First, after receiving the codes, do a primary check on the car.
2. Take Notes
Take notes of the codes to keep a check.
3.Talk to an expert
Once you have gained all the details, visit your nearest Land Rover Service center for professional help.
Bottom Line
Nevertheless, using the Land Rover diagnostic tool is the best way to handle and care for this luxury vehicle. An OBD scanner will instantly tell you about your Rover's technical issues, allowing you to seek expert help. When you choose an OBD scanner by Global Diagnostics, you experience advanced features with simple manuals and easy controls. This helps maintain your car's overall health and saves your pocket from hefty spending.
You can contact us for more information on the Land Rover OBD scanner.
FAQs
You need to plug the OBD scanning port into the OBD-II. You can find this port under the driver’s dashboard.
Before deciding to change or replace the OBD scanner, try to update it. However, you can replace it if you notice that it is continuously failing to read all the error codes.